​FLIR Systems, Inc. designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness. 

FLIR bring innovative sensing solutions into daily life through their thermal imaging systems, visible-light imaging systems, locator systems, measurement and diagnostic systems, and advanced threat detection systems. 

Today FLIR advanced systems and components are used for a wide variety of thermal imaging, situational awareness, and security applications, including airborne and ground-based surveillance, condition monitoring, navigation, recreation, research and development, manufacturing process control, search and rescue, drug interdiction, transportation safety and efficiency, border and maritime patrol, environmental monitoring, and chemical, biological, radiological, nuclear, and explosives threat detection.

About FLIR

A310 f & A310 pt

FLIR A310 f (fix-mounted) and FLIR A310 pt (pan-tilt) monitoring systems are designed to withstand the elements to remotely collect valuable data.

“Smart” thermal imagers and software can alert operators to security breaches and impending problems indicative of excess heat 24/7/365 while monitoring Electrical Substations, Hazardous Material Piles, Warehouses and Critical Vessels.

In all industries the possibility to automatically ensure quality and to prevent and detect fires is of vital importance. The solution can be a fixed infrared camera that monitors your process or asset continuously, detecting minute temperature differences in a 24/7 manner. This methodology has been implemented in a wide range of industrial automation applications all around the world.

FLIR thermal imagers offer affordable, fully integrated thermal imaging and measurement solutions for applications such as process development and optimization, industrial process monitoring, product verification, quality assurance, safety applications and more. An infrared camera can detect even small temperature differences in most operating conditions, including when there is smoke, fog or steam involved in the measurement situation.

FLIR A310 f (fix-mounted) and FLIR A310 pt (pan-tilt) monitoring systems are designed to withstand the elements to remotely collect valuable data. “Smart” thermal imagers and software can alert operators to security breaches and impending problems indicative of excess heat 24/7/365 while monitoring Electrical Substations, Hazardous Material Piles, Warehouses and Critical Vessels.


Features common to A310 f  and A310 pt

  • FLIR A310 camera: 320 x 240 pixel IR resolution
  • Built-in spot and area temperature measurement analysis functionality
  • 100MB Ethernet supplies simultaneous analog and digital video at 30 Hz
  • IP-66 encapsulation
  • Composite video output
  • Built-in web server​

FLIR A310 pt Features

FLIR A310 f Features

  • FLIR A310 camera: 320 x 240 pixel IR resolution
  • Precision pan-tilt: Fully programmable scan patterns, radar slew-to-cue, and slew-to-alarm functionality
  • Multi-sensor configurations include a day/night 36x zoom color CCD camera in the same pan-tilt package
  • Built-in spot and area temperature measurement analysis functionality
  • Extensive alarm functionality
  • h.264, MPEG-4, and MJPEG streaming
  • Built-in web server
  • 100MB Ethernet supplies simultaneous analog and digital video at 30 Hz
  • Composite video output
  • IP control: Integrate with any existing TCP/IP network and control over a PC
  • Serial control interface: Control remotely using Pelco D or Bosch commands over RS-232, RS-422 or RS-485
  • Multi-camera software: FLIR Sensors Manager allows users to manage and control a PT-Series camera in a TCP/IP network
  • IP-66 encapsulation
  • FLIR A310 camera: 320 x 240 pixel IR resolution
  • Support for the Ethernet/IP field bus protocol (analysis, alarm, and simple camera control)
  • Support for the Modbus TCP field bus protocol (analysis, alarm, and simple camera control)
  • Built-in spot and area temperature measurement analysis functionality
  • Extensive alarm functionality
  • File sending (FTP) or email (SMTP) of analysis results or images
  • 100MB Ethernet supplies simultaneous analog and digital video at 30 Hz
  • PoE (Power over Ethernet)
  • Built-in web server
  • General purpose I/O
  • Synchronization through SNTP
  • Composite video output
  • Multi-camera utility software: FLIR IP Config and FLIR IR Monitor included
  • Open and well-described TCP/IP protocol for control and setup
  • 16-bit 320 x 240 images @ 7 – 8 Hz, radiometric
  • IP-66 encapsulation

Model Number

FLIR A310 pt

FLIR A310 f

  A310 pt A310 f

Thermal Camera

Detector Type Uncooled Microbolometer
Spectral Range 7.5 – 13.0 μm
Resolution 320 × 240
Detector Pitch 25 μm
NETD <50 mK

Electronics / Imaging

Time Constant <12 ms
Frame Rate 30 Hz/9 Hz 30 Hz
Command & Control TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP Ethernet/IP, Modbus TCP, TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP

Measurement

Standard Temperature Range -20°C to 120°C (-4°F to 248°F ) 0°C to 350°C (32°F to 662°F )
Accuracy ±2°C or ±2% of Reading
Spotmeter Unlimited Geospatial Measurement Points 10
Area Unlimited Geospatial Measurement Points 10 boxes with max./min./average/position
Isotherm 1 with above/below/interval 1 with above/below/interval
Image Transfer Option / Measurement Option Scheduled & Alarm Response: File sending (ftp), email (SMTP) Measurement Mask Filter Schedule response: File sending (ftp), email (SMTP)
Difference Temperature Delta temperature between measurement functions or reference temperature
Reference Temperature Manually set or captured from any measurement function
Atmospheric Transmission Correction Automatic, based on inputs for distance, atmospheric temperature and relative humidity
Optics Transmission Correction Automatic, based on signals from internal sensors
Emissivity Correction Variable from 0.01 to 1.0
Reflected Apparent Temperature Correction Automatic, based on input of reflected temperature
External Optics / Windows Correction Automatic, based on input of optics/ window transmission and temperature
Measurement Corrections Global and individual object parameters

Optics

Camera f/# f/1.3
Integrated Lens 18 mm (25°)
Focus Automatic or Manual (Motorized)
Field of View (FOV) / Minimum Focus Distance 25° × 18.8° / 0.4 m (1.31 ft.) Available as options: 6°/15°/45°/90°
Zoom 1–8× continuous, digital, interpolating zooming on images

Image Presentation

Ethernet Video H.264, MPEG-4, and MJPEG Streaming MPEG-4
Analog Video NTSC/PAL

General

Operating Temperature Range -25°C to 50°C (-13°F to 122°F)
Storage Temperature Range -40°C to 70°C (-40°F to 158°F )
Encapsulation IP 66 (IEC 60529)
Bump / Vibration 5 g (IEC 60068-2-27) / 2 g (IEC 60068-2-6)

Day/Night CCD Camera

Camera Type Sony FCB-EX1010 -
Sensor Type 1/4” Exview HAD CCD -
Field of View 57.8° (h) to 1.7° (h) -
Focal Length 3.4 mm to 122.4 mm -
Zoom 36× Optical zoom, 12× E-zoom -
F/# 1.6 to 4.5 -
Effective Pixels (NTSC) 380,000 -

Pan-Tilt Control

Point to Point (Stand Alone), Ethernet, Network Enabled Standard -
Serial RS-232/-422; Pelco D, Bosch -

Pan-Tilt Performance

Pan Angle/Speed Continuous 360°; 0.1° to 60°/sec -
Tilt Angle/Speed 45 to -45; 0.1° to 30°/sec -

FLIR A310 pt General*

Weight ~46 lb (configuration dependent) -
Input Voltage 21-30 VAC 21-30 VDC -
Power Consumption 24 VAC: 85 VA (max w/o heaters); 215 VA (max w/ heaters) 24 VDC: 65 W (max w/o heaters); 195 W (max w/ heaters) -

Captcha Code

Click the image to see another captcha.