FLIR Systems, Inc. designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness.
FLIR bring innovative sensing solutions into daily life through their thermal imaging systems, visible-light imaging systems, locator systems, measurement and diagnostic systems, and advanced threat detection systems.
Today FLIR advanced systems and components are used for a wide variety of thermal imaging, situational awareness, and security applications, including airborne and ground-based surveillance, condition monitoring, navigation, recreation, research and development, manufacturing process control, search and rescue, drug interdiction, transportation safety and efficiency, border and maritime patrol, environmental monitoring, and chemical, biological, radiological, nuclear, and explosives threat detection.
Optical gas imaging cameras from FLIR can visualize and pinpoint gas leaks without the need to shut down the operation. With an optical gas imaging camera it is easy to continuously scan installations that are in remote areas or in zones that are difficult to access.
Continuous monitoring means that you will immediately see when a dangerous or costly gas leak appears so that immediate action can be taken.
FLIR A6604 detect the following gases:
Benzene, Ethanol, Ethylbenzene, Heptane, Hexane, Isoprene, Methanol, MEK, MIBK, Octane, Pentane, 1-Pentene, Toluene, Xylene, Butane, Ethane, Methane, Propane, Ethylene and Propylene.
FLIR A6604 is a thermal imaging camera that needs to be integrated in a housing. Once installed they will always look in the same direction. The FLIR G300 pt comes with a robust pan/tilt.
FLIR A6604 imaging cameras can be easily integrated in housings with application specific requirements.
Cooled detector makes the smallest temperature differences visible
FLIR A6604 contains a cooled Indium Antimonide (InSb) detector that produces clear thermal images of 640 x 512 pixels on which the smallest of details can be seen. More pixels give you a wider field of view so that you can monitor larger installations. It also offers an ultracrisp image.
High sensitivity mode
The high sensitivity mode further enhances the sensitivity of the cameras so that the smallest gas leaks can be detected.
Easy to control All models are easy to control from a safe distance. They can be fully controlled over Ethernet. They can easily be integrated in a TCP/ IP network. The FLIR A6604 is Vision/Genicam compatible.
Available lensesFLIR A6604 is available with 25 mm, 50 mm or 100 mm lens. Longer lenses give you a narrower field of view so that you can detect gas leaks from further away.
FLIR A6604 Thermal Imaging Camera Technical Specifications
|Imaging & Optical Data||FLIR A6604|
|IR resolution||640 x 512 pixels|
|Thermal sensitivity/NETD||<20 mK @ +30°C (+86°F)|
|Field of view (FOV) v||21.4° x 17.5° with 25 mm lens, 11.0° x 8.9° with 50 mm lens, 5.5° x 4.4° with 100 mm lens|
|Minimum focus distance||NA|
|Zoom||1x or 2x digital|
|Digital image enhancement||High Sensitivity mode|
|Detector type||Focal Plane Array (FPA), cooled InSb|
|Spectral range||3.2–3.4 μm|
|Automatic image adjustment||Continuous/manual; linear or histogram based|
|Manual image adjustment Level/span||Level/span|
|Image presentation modes|
|Image modes||IR-image, High Sensitivity Mode (HSM)|
|Electronics and data rate|
|Full frame rate||Full window 60 Hz, 1/2 window 240 Hz, 1/4 window 480 Hz|
|Temperature range||–20°C to +350°C (–4°F to +662°F) ; up to 1,500 C (2732 F) or up to 2,000 C (3,662 F) optional|
|Ethernet, type||1 Gbps|
|Ethernet, standard||IEEE 802.3|
|Ethernet, connector type||RJ-45|
|Ethernet, communication||Communication TCP/IP|
|Ethernet, video streaming||Video streaming, NTSC, PAL|
|Ethernet, image streaming||Image streaming, GigE Vision|
|Ethernet, protocols||Protocols, GigE Vision|
|Data communication interfaces|
|Interfaces||Gigabit Ethernet (GEV/Genicam compatible)|
|Video out||NTSC / PAL|
|DC operation||24 VDC, 24 W max.|
|Start-up time||Typically 7 min. @ 25°C (+77°F)|
|Operating temperature range||–40°C to +50°C|
|Storage temperature range||–55°C to +68°C|
|Humidity (operating and storage)||IEC 68-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F) (2 cycl)|
|Directives||Low voltage directive: 2006/95/EC / EMC: 2004/108/EC / RoHS: 2002/95/EC / WEEE: 2002/96/EC|
|EMC||EN61000-6-4 (Emission) / EN61000-6-2 (Immunity) / FCC 47 CFR Part 15 class A (Emission) / EN 61 000-4-8, L5|
|Bump||40g, 11msec half sine puls|
|Vibration||4.3g RIMS random vobration 3-axes|
|Weight||2.3 kg (5 Ibs)|
|Camera size, excl. lens (L × W × H)||196 x 102 x 102 mm (7.7" x 4.0" x 4.0")|