​FLIR Systems, Inc. designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness. 

FLIR bring innovative sensing solutions into daily life through their thermal imaging systems, visible-light imaging systems, locator systems, measurement and diagnostic systems, and advanced threat detection systems. 

Today FLIR advanced systems and components are used for a wide variety of thermal imaging, situational awareness, and security applications, including airborne and ground-based surveillance, condition monitoring, navigation, recreation, research and development, manufacturing process control, search and rescue, drug interdiction, transportation safety and efficiency, border and maritime patrol, environmental monitoring, and chemical, biological, radiological, nuclear, and explosives threat detection.

About FLIR

G300 pt

Optical gas imaging cameras from FLIR can visualize and pinpoint gas leaks without the need to shut down the operation. With an optical gas imaging camera it is easy to continuously scan installations that are in remote areas or in zones that are difficult to access.

Continuous monitoring means that you will immediately see when a dangerous or costly gas leak appears so that immediate action can be taken.

The FLIR G300 thermal imaging cameras let you can monitor vital gas pipelines or installations 24/7. You will immediately see if a dangerous and costly gas leak appears. You do not have to rely anymore on periodic inspections. Monitoring is done from a safe distance without the need to send technicians into potentially dangerous areas.

FLIR G300 pt  detects the following gases:

Benzene, Ethanol, Ethylbenzene, Heptane, Hexane, Isoprene, Methanol, MEK, MIBK, Octane, Pentane, 1-Pentene, Toluene, Xylene, Butane,  Ethane, Methane, Propane, Ethylene and Propylene.

FLIR G300 pt: complete solution mounted on a precise pan/tilt mechanism

Whereas the FLIR G300 a and FLIR A6604 need to be integrated in a housing, the G300 pt is already integrated in a robust housing that is mounted on a pan/tilt mechanism. 

It allows the user to rotate the camera 360° continuously and to tilt it +45 or -45. It allows monitoring different areas with the same system. Ideal if you want to monitor both gas leaks and use the system for predictive maintenance applications at the same time.

The Pan/Tilt has 128 preset positions. Perfect if you want to scan different areas continuously. The G300 pt is also equipped with a long range daylight/low light camera. The video output of the thermal imaging and daylight/low light camera are simultaneously available. The daylight camera offers a 36x optical zoom

FLIR G300 pt Thermal Imaging Camera Technical Specifications

Imaging & Optical DataFLIR G300 pt
IR resolution 320 × 240 pixels
Thermal sensitivity/NETD <15 mK @ +30°C (+86°F)
Field of view (FOV) 24° × 18° with 23 mm lens; 14.5° x10.8° with 38 mm lens
Minimum focus distance 0.3 m (1.0 ft.) for 23 mm lens; 0.5 m (1.64 ft.) for 38 mm lens
F-number 1.5
Focus Automatic using FLIR SDK or manual
Zoom 1–8× continuous, digital zoom
Digital image enhancement Noise reduction filter, High Sensitivity Mode (HSM)
Detector data
Detector type Focal Plane Array (FPA), cooled InSb
Spectral range 3.2–3.4 μm
Ethernet
Ethernet Control, result and image
Ethernet, type 100 Mbps
Ethernet, standard IEEE 802.3
Ethernet, connector type RJ-45
Ethernet, communication TCP/IP socket-based FLIR proprietary
Ethernet, video streaming Two independent channels for each camera: MPEG-4, H.264 or M-JPEG
Ethernet, image streaming NA
Ethernet, protocols TCP, UDP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, MDNS (Bonjour), SMB/CIFS, SNTP,SMTP, DHCP, uPnP
Composite video
Video out Composite video out, PAL/NTSC compatible
Imaging and optical data (visual camera)
Field of view (FOV) / Focal lenghts 57.8° (H) to 1.7° (H) / 3.4 mm (wide) to 122.4 mm (tele)
F-number 1.6 to 4.5
Focus Automatic or manual (built in motor)
Optical Zoom 36× continuous
Electronic Zoom 12× continuous, digital, interpolating
Detector data (visual camera)
Focal Plane Array (FPA) / Effective pixels 1/4” Exview HAD CCD / 380,000
Technical specification (pan & tilt)
Azimuth Range Az velocity 360° continuous, 0.1 to 60°/sec max
Elevation Range El velocity +/- 45°, 0.1 to 30°/sec. max
Programmable presets 128
Automatic heaters Prevent window to ice up. Switched on at +4°C (39°F). Switched off at +15°C (59°F).
Power system
DC operation 24 VAC (21-30 VAC; 24 VAC: 215 VA max with heather) or 24 VDC (21-30- VDC; 24 VDC: 200 W max. with heather)
Environmental data
Operating temperature range –25°C to +50°C (–13°F to +122°F)
Storage temperature range –30°C to +60°C (–22°F to +140°F)
Humidity (operating and storage) IEC60068-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F) (2 cycl)
Directives Low voltage directive:2006/95/EC, EMC:2004/108/EC, RoHS:2002/95/EC, WEEE:2002/96/EC
EMC EN61000-6-2 (immunity) / EN61000-6-3 (emission) / FCC 47CFR Part 15 Class B (emission) / EN 61000-4-8, L5
Encapsulation IP 66
Bump 5g, 11 ms (IEC 60068-2-27)
Vibration 2g (IEC 60068-2-6)
Physical data
Weight 18.7 kg (41.2 lb.)
Camera size, excl. lens (L × W × H) 460 x 467 x 326 mm (18.1 x18.4 x 12.8 in.)
Housing material Aluminum
Captcha Code

Click the image to see another captcha.