​FLIR Systems, Inc. designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness. 

FLIR bring innovative sensing solutions into daily life through their thermal imaging systems, visible-light imaging systems, locator systems, measurement and diagnostic systems, and advanced threat detection systems. 

Today FLIR advanced systems and components are used for a wide variety of thermal imaging, situational awareness, and security applications, including airborne and ground-based surveillance, condition monitoring, navigation, recreation, research and development, manufacturing process control, search and rescue, drug interdiction, transportation safety and efficiency, border and maritime patrol, environmental monitoring, and chemical, biological, radiological, nuclear, and explosives threat detection.

About FLIR


Affordable and Flexible Solutions for Real-Time Thermal Analysis

The all new A6700sc redefines affordable high performance in mid-wave science-grade thermal imaging. Featuring a highly sensitive 640x512 pixel resolution detector, the A6700sc produces beautiful temperature-calibrated IR imagery that’s perfect for demanding research and science applications. 

This high performance system uses the latest state of the art focal plane array (FPA) detector technology along with real-time, large dynamic range electronic modules. Infrared radiation from the scene under investigation is collected through a front lens, designed to offer minimal aberration across the full IR wavelength range.  A rotating filter wheel is inserted between the lens and the focal plane allowing instantaneous imaging of sub-spectral bands. The FPA detector is capable of capturing up to 400 frames per second, each high quality image being captured in snapshot mode.  The FLIR Orion Series can also be used as a normal IR  camera at full speed by removing or stopping the filter wheel.

What industries benefit from this technology?
The FLIR Orion SC7000 Series is specifically designed for R&D applications, infrared signature analysis and IR tracking.

Key features
• Excellent image quality: 640 x 512 pixels
• High sensitivity: <20 mK
• High speed image acquisition: up to 480 Hz
• Synchronization: with other instruments
• Extender rings available
• Wide choice of optics
• Very low noise: cryogenically cooled InSb Detector

IR2_350.jpg IR1_350.jpg

Specifications of FLIR A6700sc Infrared Cameras


Detector Type Indium Antimonide (InSb)
Spectral Range 3- 5 pm or 1 - 5 pm MM
Resolution 640 x 512
Detector Pitch 15pm
NETD <20 mK (18 mk typical)
Well Capacity 7.2 M electrons
Operability >99.8% ( >99.95% typical)
Sensor Cooling Closed Cycle Rotary
Electronics / Imaging
Readout Snapshot
Readout Modes Asynchronous Integrate While Read; Asynchronous Integrate Then Read
Synchronization Modes Sync In
Integration Time 480 ns to 687 sec
Frame Rate (Full Window) Up to 60Hz, full res Up to 480Hz, 1/4 res
Subwindow Mode 1/2 or 1/4 Window
Max Frame Rate (@ Min Window) 480Hz @ 1/4 window
Dynamic Range 14-bit
Digital Data Streaming Gigabit Ethernet (GigE Vision)
Analog Video NTSC, PAL
Camera Control Genicam
Standard Temperature Range -20°C to 350°C (-4°F to 662°F)
Optional Temperature Range Up to 1,500°C (2,732°F) Up to 2,000°C (3,632°F)
Accuracy ± 2°C or ±2% of reading
f/# f/4.0 or f/2.5
Available Lenses 3-5pm: 13mm, 13mm (low distortion), 25mm, 50mm, 100mm (all lenses are f/2.5)
  1-5pm: 25mm, 50mm, 100mm (lenses are f/2.5)
Microscopes 1x (this lens is f/4 and requires an f/4 camera)
Focus Manual
Filtering Removable Behind the Lens or Permanent “cold" Filter Available
Image Presentation
Analog Palettes Selectable 8-bit
AG Manual, Linear, Plateau Equalization, DDE
Zoom Video Zoom is Auto Selected: Full Res = 1x, 1/4 Res = 2x
Operating Temperature Range -40°C to 50°C (-40°F to 122°F)
Storage Temperature Range -55°C to 80°C (-67°F to 176°F)
Altitude 0 to 10,000 Feet Operational; 0 to 70,000 Feet Non-Operational
Shock / Vibration 40 g , 11 msec A sine pulse / 4.3 g RMS Random Vibration, All 3 Axis
Power 24 VDC ( < 50 W steady state)
Weight w/o Lens 5 lbs / 2,3 kg
Size (L x W x H ) w/o Lens 7.7 x 4.0 x 4.0" / 19.6 x 10.2 x 10.2 cm
Mounting 2 x M"-20, 1 x 3/8"- 16, 4 x 10/24
Captcha Code

Click the image to see another captcha.