PCB Piezotronics was founded in 1967 as a manufacturer of piezoelectric quartz sensors, accelerometers, and associated electronics for the measurement of dynamic pressure, force, and vibration. The unique expertise of the company was the incorporation of microelectronic signal conditioning circuitry within these sensors to make them easier to use and more environmentally compatible. These ICP® sensors gained wide popularity and became the foundation for the company's success.

Subsequent growth and steady investment in facilities, machinery, and equipment permitted a constant broadening of the product offering. Measurement capabilities expanded with the addition of piezoceramic, tourmaline, capacitive, piezoresistive, and strain gage sensing technologies. Ensuing products include industrial accelerometers, DC accelerometers, load cells, torque sensors, microphones, pressure transmitters, and calibration equipment.

The backbone of the company is its mission statement: Total Customer Satisfaction. This mission is not only supported by products that offer great value, but also backed by our industry exclusive Lifetime Warranty Plus. Factory applications engineering and a worldwide network of sales offices and representatives are readily available to assist with customer requests.

About PCB Piezotronics

Low Cost Integral - 607A11

Low profile industrial ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 10-ft integral cable & swiveler base, single point ISO 17025 accredited calibration

 

Model: 607A11

Platinum Swiveler® Industrial ICP® Accelerometer
Platinum Stock Products; Low profile industrial ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 10-ft integral cable & swiveler base, single point ISO 17025 accredited calibration

  • Sensitivity: (±15%) 100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to 10000 Hz)
  • Measurement Range: ±50 g (±490 m/s²)
  • Mounting: Stud
  • Electrical Connector: Molded Integral Cable


Options:

  • Base Model
  • (M) Metric Mount



  ENGLISH SI  
Performance
    Sensitivity (±15 %) 100 mV/g 10.2 mV/(m/s²) [1] 
    Measurement Range ±50 g ±490 m/s²  
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz  
    Resonant Frequency 1500 kcpm 25 kHz [2] 
    Broadband Resolution (1 to 10000 Hz) 350 µg 3434 µm/sec2 [2] 
    Non-Linearity ±1 % ±1 % [3] 
    Transverse Sensitivity ≤7 % ≤7 %  
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Temperature Range -65 to +250 °F -54 to +121 °C  
    Temperature Response See Graph %/°F See Graph %/°F [2] 
    Enclosure Rating IP68 IP68  
Electrical
    Settling Time (within 1% of bias) ≤2 sec ≤2 sec  
    Discharge Time Constant ≥0.3 sec ≥0.3 sec  
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <150 Ohm <150 Ohm  
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC  
    Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2] 
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2] 
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2] 
    Electrical Isolation >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 9/16 in 14 mm  
    Size - Height 0.97 in 24.6 mm  
    Weight 1.1 oz 31 gm [4] 
    Mounting Stud Stud  
    Mounting Thread 1/4-28 Male 1/4-28 Male [5] 
    Mounting Torque 3 to 4 ft-lb 4.1 to 5.4 Nm [7][8] 
    Mounting Torque 2 to 3 ft-lb 2.7 to 4.1 Nm  
    Sensing Element Ceramic Ceramic  
    Sensing Geometry Shear Shear  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Welded Hermetic Welded Hermetic  
    Electrical Connector Molded Integral Cable Molded Integral Cable  
    Electrical Connection Position Side Side  
    Cable Length 10 ft 3.0 m  
    Cable Type Polyurethane Polyurethane [6] 

All specifications are at room temperature unless otherwise specified.


CEceneleccsa_us

Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] Measured with mounting stud.
[5] 1/4-28 has no equivalent in S.I. units.
[6] Twisted shielded pair.
[7] 1/8" hex Allen key required for English version, 3mm hex Allen key required for metric version.
[8] Stud torque must exceed sensor hex nut torque to ensure proper dismantling.
[9] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
080A156 Mounting Base (1)
ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
  ENGLISH SI
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<=Ta<=121°C, II 1 G
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<=Ta<=121°C, II 3 G
(M) Metric Mount
  ENGLISH SI
 
Accessories:
     M080A159A Accessory for IMI Sensors Product (1)
(TO) Temperature Output
  ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector Molded Integral Cable
    Electrical Connections (Red) Acceleration Output
    Electrical Connections (Black) Ground
    Electrical Connections (White) Temperature Output
Captcha Code

Click the image to see another captcha.