​FLIR Systems, Inc. designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness. 

FLIR bring innovative sensing solutions into daily life through their thermal imaging systems, visible-light imaging systems, locator systems, measurement and diagnostic systems, and advanced threat detection systems. 

Today FLIR advanced systems and components are used for a wide variety of thermal imaging, situational awareness, and security applications, including airborne and ground-based surveillance, condition monitoring, navigation, recreation, research and development, manufacturing process control, search and rescue, drug interdiction, transportation safety and efficiency, border and maritime patrol, environmental monitoring, and chemical, biological, radiological, nuclear, and explosives threat detection.

About FLIR

CM78

FLIR CM78 Industrial 1000 Amp Clamp with IR Thermometer

Combines a True RMS Digital Multimeter, Non-Contact Clamp Meter, and Spot IR Thermometer

The FLIR CM78 is a multifunctional, 1000 Amp Clamp Meter for the electrician who works on high-powered equipment and temperature systems. 

Features

AC/DC (1000A or 1000V)
Take accurate AC/DC measurements (up to 1000A or 1000V) safely and quickly on high-powered equipment and complex machinery.
 

Non-Contact Safety
Save time by attaching the meter to the target when the panel is de-energized, then measure the active equipment when the panel is closed.
 

Spot-Laser IR Thermometer
Quickly scan for hot spots on panels, conduits, and motors using the built-in non-contact IR thermometer.
 

Type K Thermocouple
Verify that associated current measurements and temperature readings are correctly aligned and in spec.
 

Bluetooth Connectivity
Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
 

METERLiNK Compatibility
Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
 

Bright Dual-LED Worklights
Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
 

Rugged & Shock-Resistant
Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

CM78-ACDC.jpg


CM78-SpotLaser-IR.jpg

 

 

 

 

Technical Summary
  Range Basic Accuracy
AC/DC Current Range 1000 A +/- 2.5%
AC/DC Voltage 1000 V +/- 1.5%
Resistance 40.00 MΩ +/- 1.5%
Capacitance 4.000 mF +/- 3%
Frequency 4000 Hz +/- 31.5
Temperature (IR) -58 to 518°F, -50 to 270°C +/- 2%
IR Distance to Target Ratio 8 : 1 in  
Temperature (Type K) -4 to 1400°F, -20 to 760°C +/- 3%
General Information
Bluetooth Range Max 32 ft (10 m)
Jaw Opening 42 mm (1.7 in, 2000MCM)
Safety Category CAT IV-600V, CAT III-1000V
Warranty Limited Lifetime
Certifications CE, UL, FCC
Captcha Code

Click the image to see another captcha.