Home | Products | Test and Measurement Instruments | CM83

​FLIR Systems, Inc. designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness. 

FLIR bring innovative sensing solutions into daily life through their thermal imaging systems, visible-light imaging systems, locator systems, measurement and diagnostic systems, and advanced threat detection systems. 

Today FLIR advanced systems and components are used for a wide variety of thermal imaging, situational awareness, and security applications, including airborne and ground-based surveillance, condition monitoring, navigation, recreation, research and development, manufacturing process control, search and rescue, drug interdiction, transportation safety and efficiency, border and maritime patrol, environmental monitoring, and chemical, biological, radiological, nuclear, and explosives threat detection.​

About FLIR

CM83

Back

Engineered with Versatility to Help You Manage Power Analysis & VFD Troubleshooting

The FLIR CM83 is an industrial-grade Power Clamp Meter engineered with advanced power analysis and VFD filtering functions required by electrical troubleshooters.

VFD Mode
Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.
 

Harmonics Mode
Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.
 

Phase Rotation
Analyze three-phase systems to measure power draw and verify if power is evenly balanced.
 

Inrush Current
Measure hard and soft start-up inrush current spikes while equipment is ramping up.

METERLiNK Compatibility
Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
 

Power Factor and Active Power
Monitor power quality improvements, such as start-up realignments on three-phase equipment.
 

Bluetooth Connectivity
Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
 

Bright Dual-LED Worklights
Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
 

Rugged & Shock-Resistant
Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

CM83-VFD-Mode.jpg

 

CM83-Inrush-Current.jpg

Technical Summary
  Range Basic Accuracy
AC/DC Current Range 599.9 A Max +/- 2%
AC/DC Voltage 999.9 V Max +/- 1% / 0.7%
Harmonics 1st-25th Order +/- 5%
Total Harmonic Distortion 0.0 to 99.9% +/- 3%
Inrush Current 599.9 ACA Max (Integration Time 100 ms) +/- 3%
Active Power 9.999 kW to 599.9 kW, (10 V, 5 A min) +/- 3%
Diode Test 0.4 to 0.8 V +/- 0.1V
Capacitance 3.999 mF Max +/- 1.9%
Resistance 99.99 kΩ Max +/- 1%
Continuity Threshold 30 Ω +/- 1%
Frequency 20.00 Hz to 9.999 kHz +/- 0.5%
General Information
Jaw Opening 37 mm (1.45”, 1500MCM)
Category Rating CAT IV-600V, CAT III-1000V
Bluetooth Range Max 32 ft (10 m)
Certifications CE, UL, FCC
Warranty Limited Lifetime
Captcha Code

Click the image to see another captcha.