Featured

Ultraprobe® 2000

Category

Fast, accurate, and designed for ease of use, it often takes no more than 15 minutes to become competent in ultrasonic testing using the Ultraprobe® 2000.

The Ultraprobe® 2000 can heterodyne ultrasound into audible range providing accurate sound reproduction. Sensitive only to ultrasonic frequencies, the Ultraprobe 2000 will not respond to the low frequency noises often associated with most plant equipment. Therefore, the “gun” can be effectively utilized in extremely loud environments.

The Ultraprobe® 2000 can help:

Key features

Additional Info

Contact Applications include:

  • Bearings
  • Gear Boxes
  • Line Blockage
  • Steam Traps
  • Valves
  • Compressors
  • Motors
  • Pipes
  • Flow Direction
  • Underground Leaks

Airborne Applications include:

  • Vacuum Leaks
  • Welds
  • Substations
  • Heat Exchangers
  • Seals
  • Pumps
  • Tanks
  • Air Brakes
  • Gaskets
  • Pressure Leaks (all types)
  • Electrical Arc (including CORONA)
  • Caulking (air infiltration)
  • Wind Noise Problems
  • Junction Boxes

Features

  • ​​3 modes for reporting data:
    • auditory channels (via a headset that has been specifically selected for heavy duty industrial use),
    • uniquely designed bi-modal analog meter
    • through the ability to interface with vibration analyzers, & sound recording devices via the heterodyned output.
  • Bi-Modal Meter Switch for logarithmic and linear meter scale adjustments
  • Optional auxiliary mode selection for chart recorder output: 0 – 50 mV, Precision 10 turn adjustment dial with numerically calibrated sensitivity increments for finite gain adjustment
  • Sensitivity Control, A 10 turn numerically calibrated adjustable potentiometer. Spring loaded trigger switch

Specifications

Technical specifications

CONSTRUCTION:

Hand held metered pistol type made with anodized aluminum and ABS plastic


FREQUENCY RESPONSE:

Detect ultrasonic frequencies between 20 kHz and 100kHz, continuously variable. Frequencies are converted to 100 Hz to 3 kHz audio.


PROBES:

Scanning Module: patented TRISONIC plug-in type consisting of a phased array of multiple transducers for airborne ultrasound. This probe is shielded against RF interface.

Rubber Focusing Probe (flexible) slips over scanning module to concentrate conical directivity and to shield reception of stray ultrasound. Also fits over Stethoscope Module to shield against high ambient ultrasound while unit is at maximum sensitivity.

Stethoscope Module: plug-in type, insulated probe with RF shielding; 4 1/2″ (11.4 cm) long steel probe tip, conically shaped for uniform surface contact. Probe tip is interchangeable. Stethoscope Extension Kit: 3 piece, segmented metal rods to increase stethoscope contact range 20″ (50.8.cm) and 31″ (76.2 cm)./p>


TRANSMITTER:

Patented warble tone transmission


HEADSET:

Noise isolating type: double headset wired monophonic, impedance, 16 ohms. Over 23 dB of noise attenuation. Meets or exceeds ANSI specification and OSHA standards.


INDICATORS:

Ballistic output meter: linear calibration scale of 0-100 for logging relative measurements. Meter is accurate 1% throughout entire scale. Low level Battery LED indicator for main housing internal power supply.


BATTERIES:

Self contained nickel-cadmium rechargeable. RECHARGING SYSTEM: Standard 110V. Also available in 220V.


OVER-ALL SIZE:

Complete kit in Zero Haliburton aluminum carrying case: 15″ x 22″ x 7″ (38.1 x 55.9 x 17.8 cm). Pistol unit 2 lbs (.9kg). Complete carrying case: 14 lbs (6.4 kg).


SENSITIVITY:

Detects .005″ (.127 mm) dia. leak @ 5 psi (.34 bar) at a distance of 50 ft

(15.24 m)

THRESHOLD*:
1 X 10-² 1 X 10-³ std. cc/sec. freon


WARRANTY:

5 Years parts/labor

*depends on configuration


ULTRAPROBE 2000 KIT:

Meets and exceeds ASTM E1002-93 requirements for Leak Detection.


GOVERNMENT CODES

NSN: 6635-01-156-3927
FSCM (CAGE) Code: 59202


Table of Allowance #s:

788, 404, 576, 583, 607


Covered by one or more of the following patents:

4416145, EP015115, 502674183


Factory Mutual System Approved

Intrinsically Safe, Class 1, Division I, Groups A, B, C & D
American Buerau of Shipping (ABS) TYPE APPROVAL 95-NY-166-X
Det Norske Veritas (DNV)

Product Enquiry

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Related Products